Process of Public Relation
This process is primarily composed of four steps: using research to define the problem or situation, developing objectives and strategies that address the situation, implementing the strategies, and then measuring the results of the public relations efforts. Sometimes acronyms, such as John Marston’s RACE (research, action planning, communication, evaluation) or Jerry Hendrix’s ROPE (research, objectives, programming, evaluation) are used to describe the process. Marston (1979). You’ll notice that that the process always starts with research and ends with evaluation.
Although it is easier to remember such acronyms, the four steps are essentially the following:
- Use research to analyze the situation facing the organization and to accurately define the problem or opportunity in such a way that the public relations efforts can successfully address the cause of the issue and not just its symptoms.
- Develop a strategic action plan that addresses the issue that was analyzed in the first step. This includes having an overall goal, measurable objectives, clearly identified publics, targeted strategies, and effective tactics.
- Execute the plan with communication tools and tasks that contribute to reaching the objectives.
- Measure whether you were successful in meeting the goals using evaluation
Step 1: Formative Research to Analyze the Situation
The first step in the process is analyzing the problem or opportunity. This involves research, either formal or informal, to gather information that best describes what is going on. Research used to understand the situation and help formulate strategies is called formative research.
For example, a natural gas company may be considering the route for a new pipeline. It must conduct research to understand what possible obstacles it might face. Are there any environmentally protected or sensitive regions in the area? Are there strongly organized neighborhood groups that might oppose the project? What is the overall public support for natural gas and transportation pipelines? Community relations professionals are very familiar with the NIMBY (Not In My Back Yard) sentiment. Additionally, are there acceptable alternatives to the pipeline construction? Alternative routes? Alternative drilling procedures? Alternative construction times? All of these questions should be considered before the first shovel breaks ground.
According to Cutlip, Center, and Broom, research “is the systematic gathering of information to describe and understand situations and check out assumptions about publics and public relations consequences.”Cutlip, Center, and Broom (2006). Much of this information may already exist and may have been collected by other agencies. Research that has previously been conducted is called secondary research. For example, the Interstate Natural Gas Association of America has conducted surveys on public opinion and communication practices of pipeline companies. Research on NIMBY and other social behaviors is also available through a review of academic and professional literature. Secondary sources are the least expensive way to gain background knowledge.
However, you may need to conduct primary research or data you collect yourself for your purposes. You may need to conduct interviews or focus groups with neighborhood associations or environmental groups. You might consider surveys with homeowners and business that might be located near the pipeline. There are many different methods to collect the data that is needed to fully understand the situation. Analysis of previous news stories about pipelines in this region would give you a good idea about the way this story might be framed by media. Another analysis of blogs and other social media about pipelines also would be a good idea. Again the purpose for gathering the information is to help with understanding the situation.
Using a SWOT Analysis
A very popular tool for analyzing situations is the SWOT (strengths, weaknesses, opportunities, threats) analysis. This breaks down a situation by looking at the internal and external factors that might be contributing to the situation before developing strategies. The internal factors are the Strengths and Weaknesses of the organization. The external factors are the Opportunities and Threats existing in the organization’s environment
The first step is to look internally at the strengths and weakness of the organization. For example, the energy company may find that it has very strong relationships with members of the media, has good employee morale, is financially sound, and has a culture that values innovation. It may also find that it has weak relationships with environmental groups and neighborhood associations, has a culture that promotes confidence in its decisions (perhaps even bordering on arrogance), and has dedicated few resources in the past toward community relations. This information helps inform the possible strategies it needs to take regarding the construction of a new pipeline.
The external factors, opportunities and threats, are usually the reasons the organization finds itself in the situation. In the case of the energy company, it sees an opportunity to drill into a new methane gas deposit and provide that energy to its clients. To the energy company, this appears to be a win-win situation because it can continue to provide energy to meet the demand of its consumers. However, it also needs to assess the possible threats, which include probable legal actions from opposition groups that could lead to court injunctions. Other threats might include negative coverage of the project by the media, leading to a damaged reputation and lower public support for the project.
After conducting the SWOT analysis, you can couple the internal factors with the external factors to suggest possible strategies.
- SO strategies focus on using organizational strengths to capitalize on the external opportunities.
- ST strategies also use organizational strengths to counter external threats.
- WO strategies address and improve organizational weaknesses to be better prepared to take advantage of external opportunities.
- WT strategies attempt to correct organizational weaknesses to defend against external threats.
Constructing a Situation Analysis
Once enough data and information has been collected so that you really do understand the core contributing factors and not just the surface conditions, then it is time to write a two-paragraph statement that summarizes the situation. The first paragraph should redefine the situation using the data collected by your research. Highlight the insights gained through formal and informal research. The second paragraph should identify the problems, difficulties, and potential barriers to resolving the issue. These also should have been identified in the research, and the research also should help you recommend solutions to these barriers. For example, the energy company would address the opportunity to provide a new energy source to its customers using innovation and technology for efficient and effective delivery of the natural gas, asking its employees to be ambassadors to the community, and working with the media to tell the positive story of the project. It would also need to identify that previous pipeline projects have been delayed, and in some cases halted, because of the effective opposition of environmental groups and neighborhood associations, and that it needs to improve its efforts with community relations before starting the project.
From the description paragraphs, a succinct one-sentence problem/opportunity statement is written that cuts to the core of the situation and identifies the consequences of not dealing with the problem or opportunity. For example, for the hypothetical utility pipeline situation, because environmental and neighborhood groups have been influential in stopping pipeline projects in the past and this pipeline route is planned to go through sensitive regions, the company needs to build better relationships with the community through communication and action that will eliminate or reduce obstacles to building the pipeline.
Step 2: Strategic Action Planning
The strategic plan should be focused on resolving or capitalizing on the situation identified in the problem/opportunity statement. It begins by flipping the problem/opportunity statement into a goal. In the case of the energy company, the goal might be the following: “To use communication and actions that improve relationships with key members of the community in order to successfully complete a pipeline that delivers newly found methane gas to customers.” Notice that there is room for change with the pipeline plans in this goal statement. The end goal is to build a pipeline, and in order to achieve this the company may need to make adjustments to the routes or construction of the pipeline. Care should be taken not to write goals that suggest that the public will do something you want them to do. Because publics cannot actually be controlled, it might set up the organization for failure. Instead, focus should be on what can be done to achieve the goal, such as communicate and act in such a way that earns the consent or endorsement of these publics.
The goal provides the direction for the strategic plan and objectives provide the direction of specific and measurable outcomes necessary to meet the goal. A good objective meets the following criteria: it should be an end and not a means to the end; it should be measurable; it should have a time frame; and it should identify the public for the intended outcome.Anderson and Hadley (1999).
- End and not means to an end. An objective should be an outcome that contributes to the goal. There are three possible outcomes for these objectives: cognitive (awareness, understanding, remembering), attitudinal (create attitudes, reinforce positive attitudes, change negative attitudes), and behavior (create behaviors, reinforce positive behaviors, change negative behaviors). The opposite of these outcome objectives are what Lindenmann called “Output Objectives,”Lindenmann (2003). which are the means to an end. They include the communication efforts to reach the objectives such as placement of messages in influential media. These are actually strategies and not objectives (more on this later).
- Measureable. Objectives also help hold public relations professionals accountable for their efforts. Public relations should engage only in strategies and tactics that actually contribute to larger organizational goals. Measurable objectives often require a comparative number, such as 65% awareness of a product or program. An objective cannot be set to increase awareness by 20% if the current level of awareness is unknown. This is why formative research is needed to establish benchmarks. If no such benchmark exists, then it is customary to establish a desired level, such as “increase awareness to 85%.” The problem with this is that you do not know how close you are to that figure before the campaign. This might be an easy objective to achieve (if your level of awareness is already at or above 85%) or a very difficult one (if your awareness level is around 20%).
- Time frame. When will the objective be met? If there is no time frame specified, then it cannot be accountable.
- Identify the public. It is a good idea to identify overall objectives before tying them to a public. This helps to think about which publics are connected to the objective. However, to make an objective truly measurable it must identify a public, because different publics will be at different levels of awareness, attitudes, and behaviors. For example, the objective may be to increase attendance at employee benefits meetings. Research may find that the messages are getting clogged at middle management, which has many people who have a negative attitude about the meetings and are not encouraging employees. One objective might focus on increasing the level of awareness of employees while creating another objective focused on increasing positive attitudes of middle management. Of course, this also means that you should look into your meetings and find out how to improve them.
- Outtake objectives are focused on increasing awareness, understanding, and retention of the key message points. It is far more important to know that the audience received the message than whether it was sent out. For example, you may send out a message in an employee newsletter that reaches 10,000 employees. You need to be more concerned on the impact that message had than the number of people it reached.
- Outcome objectives are perhaps the most important, but also the most difficult to achieve. For example, let’s say the public relations program is for the state highway patrol to increase awareness of the importance of seatbelt usage and the objective is to decrease the number of fatalities caused by not using a seatbelt. There is a diffusion process that occurs with adoption of this behavior. First, drivers need to be aware and understand the safety advantages of seatbelts. Next, they need to have a positive attitude about wearing seatbelts. Finally, this positive attitude will hopefully translate to increased use of seatbelts.
Tie Strategy to Objective
Too often public relations programs have been primarily tactical and have skipped the strategic step of creating objectives. Public relations professionals are doers and often want to get to the action first. However, too many tactics have been executed because of tradition (“We always send out press releases”) than because of strategy. What makes public relations strategic is having the action tied to the real needs of the organization. If you come up with a really clever tactic but it does not help meet any objectives it should be seriously reconsidered. Far too many resources often are wasted on creative tactics and fall short of addressing the needs of the issue. At the same time, brainstorming on strategies may lead to a legitimate idea that was not considered during the objectives phase, and it may require reevaluating the objectives. But if a strategy cannot be tied to an essential outcome, then it should not be executed.
All groups within publics should be differentiated based on common characteristics such as demographics, geographics, or psychographics. Demographics include variables such as gender, income, level of education, and ethnicity.
Step 3: Communication Implementation
The best public relations programs include both communication and action. The old adage “actions speak louder than words” is as true for public relations as it is for other business disciplines. Sometimes an organization needs to act, or react, before it can communicate. For example, if employees are not attending training seminars it might not be enough to try more creative and persuasive messages. The seminars might need to be more relevant and interesting for the employees providing something to communicate that might change behaviors. Organizations should not only expect stakeholders to behave in ways that benefit the organization; sometimes the organization needs to change its actions and behaviors to improve these critical relationships.
Step 4: Evaluation
According to Paine, four concerns should be addressed when evaluating the effectiveness of a public relations campaign:
- Define your benchmark.
- Select a measurement tool.
- Analyze data, draw actionable conclusions, and make recommendations.
- Make changes and measure again.